2022-09-09
I. Helical milling of internal holes1. Processing rangeBlind or through holes with large bore diameters are often machined by spiral milling as twist drilling is too slow or impossible. Moreover, as the tool chosen for this method does not have a bottom edge, it is more suitable for small depths of Read More
2022-09-02
With the widespread use of stainless steel materials, whether in turning, milling, drilling, tapping and so on will often encounter, but stainless steel has different characteristics from other materials, so in the processing of stainless steel has become a technical staff of a not insignificant pro Read More
2022-08-30
In the production of some special parts, the machining process often encounters some difficult to use the standard saw blade milling cutter for processing, the general saw blade milling cutter can not meet the needs of the product. Need to customize the installation method, geometry, tool angle, etc Read More
2022-06-14
3, tungsten steel milling cutter end-edge cuttingIn the CNC milling process of mold and other workpiece cavities, when the cutting point is a concave part or deep cavity, the extension of the tungsten steel milling cutter needs to be lengthened. If a long flute tungsten steel milling cutter is used, Read More
2022-06-08
1, Clamping of tungsten steel milling cutterMost of the milling cutters used in machining centers are clamped by spring clamp set and are in cantilever form when used. In the milling process, sometimes there may be milling cutters from the tool holder gradually extended, or even completely fall off, Read More
2022-05-31
Milling cutter is a rotating tool with one or more teeth used for milling, and the teeth are used to intermittently cut off the workpiece in turn. According to the purpose, material and structure of the milling cutter milling cutter is divided into different types, the following is a brief introduct Read More
2022-04-01
With the development of industrial technology, the use of non-standard tools has been expanding. Non-standard tools can be used without tool adjustment, simple operation and safe processing; rough drilling, reaming and hole processing can be realized in one. The clamping part of the non-standard too Read More
2022-03-29
Due to the production of ordinary metal or non-metallic parts cutting surface measurement of standard tools, workpiece and hardness increases when the over heat treatment, or stainless steel and other workpieces are more likely to stick to the knife, with some surface shape workpiece complex, or the Read More