+86-0512-62886650/18962183618
FAQ about Tool Grinding
Home » News » FAQ about Tool Grinding

FAQ about Tool Grinding

Views: 78     Author: Site Editor     Publish Time: 2022-07-08      Origin: Site

Q: What tools need resharpening?


A: Most of the tools can be resharpened, in the production design to consider the subsequent tool resharpening; of course, on this basis tool resharpening should also take into account the overall cost and benefit; for most of the relatively low price, resharpening costs are relatively high tool can be directly scrapped and give up resharpening, because its own added value is not high. 


For some forming tools, because the size will be small after resharpening and affect the use. When some standard diameter taps, milling cutters, drills need to be reworked, when the overall cost is relatively high, it is necessary to consider tool resharpening, so as to reduce production costs, reduce resource loss of low-carbon green behavior.

milling cutter

Q: What is the focus of tool resharpening?


A: When the dull willing edge is cut off, then the new edge is ground on a more complete substrate; for hole processing drilling tools, the damage to the guide part must be taken into account before grinding; when the edge mouth normal uniform wear can be directly restorative grinding; and when the edge chipping is not very serious tool can be cut off the wear or chipping parts and then grind;.


Q: Can the tool be recoated after resharpening?


A: Tool resharpening can be done by grinding the rear face (and front face) to produce a new intact edge; selecting the appropriate front and rear angles and edge treatment; according to the customer's requirements, we can choose whether the tool needs to be coated after resharpening.